Reset Your Holosun EPS Carry Red Dot Device

Wiki Article

Need to bring back your Holosun EPS Carry Red Dot to its default settings? A quick factory reset can fix a range of troubles. Here's how to conduct a full factory reset on your Holosun EPS Carry:

* First, find the tiny reset button on the bottom of your device.

* Use a thin object like a paperclip to activate and maintain the reset switch for about 3 seconds.

* You'll certainly notice a momentary indication on the viewfinder to confirm that the reset is complete.

* Let go the reset switch and your Holosun EPS Carry should now be back to its original settings.

Returning to Your Holosun EPS Carry to Default Settings

Sometimes your Holosun EPS Carry may need a little refresh. This can occur if you've made some modifications and want to revert to the factory settings. Thankfully, it's a pretty straightforward procedure. First, locate the small lever on the side of your sight. This is the recovery button. Next, use a small object like a pen or paperclip to gently activate the switch. Hold it down for approximately 5 seconds until you see the display flash. Release the switch and your Holosun EPS Carry will now be back at its factory defaults.

Hard Reset for the Holosun EPS Carry Red Dot Sight

Performing a factory reset on your Holosun EPS Carry is a straightforward process that will restore it to its original settings. This can be helpful if you've made some changes to the sight's configuration and want to start fresh or if you're experiencing any issues.

To factory reset your Holosun EPS Carry, first ensure that the red dot is powered on. Then, press and sustain both the mode button and the power button simultaneously for approximately 5 seconds. You will know that the reset has been successful when the red dot blinks rapidly or you hear a confirmation tone.

Once the reset is complete, your Holosun EPS Carry will be back to its factory defaults. This means all custom settings, such as brightness levels and reticle patterns, will have been erased. You will then need to adjust the sight according to your preferences.

Get Back to Basics: Holosun EPS Carry Red Dot Reset

A solid grip on your firearm is paramount, and a reliable red dot sight will significantly improve their accuracy. The Holosun EPS Carry series stands out for its robust build and user-friendly design. However, even the most dependable sights can sometimes become misaligned. This guide will walk you through the straightforward process of resetting your Holosun EPS Carry red dot, ensuring it's accurately aligned for optimal performance.

With a few simple steps and attention to detail, you can keep your click here Holosun EPS Carry red dot functioning flawlessly. Remember, regular maintenance and calibration are essential for maximizing the accuracy and reliability of any firearm optic.

Restore Your Holosun EPS Carry to Factory Settings

Restoring your Holosun sight to factory settings is a easy process that can be useful in various situations. If you're experiencing glitches with your EPS Carry or simply want to reset all user-configured settings, following these steps will guide you through the procedure. First, locate the reset button on the side of your sight. It's usually a small button. Next, use a pen to activate the reset button and hold it down for approximately 3-5 seconds. You should see a changing LED indicator, which signifies that the reset is successful. Release the button and your EPS Carry will power off and on automatically. Once it's back online, you can check that your settings are now at their default values.

Restore to Factory Defaults

In case your Holosun EPS Carry Red Dot isn't functioning as expected, a factory reset can often resolve the issue. To initiate this process, first locate the minute button on the back of your optic. With your fingertip, {press and sustain it for a length of approximately 15 seconds. You'll observe an indication on the display that confirms the reset is in progress. Once complete, your Holosun EPS Carry Red Dot will be back to its default settings.

Report this wiki page